Reviews
Kirk Rettger
Had an issue with a Hammer and called in to discuss what needed to be done for repairs. Jesse was extremely helpful and went above and beyond in making sure we purchased the correct parts. Highly recommended!
★★★★★ a year ago
Matthew R. Hannon
Great customer service. Helped me figure out a problem with my Soosan Hammer. Had the parts in stock and shipped it quickly.
★★★★★ 10 months ago
Fidel Ellis
They did a great job repairing my hydraulic breaker. Timely service. They take care of their customers.
★★★★★ 8 months ago
Aycan Yaganoglu
They are expert👍
★★★★★ 7 years ago
John Zimmerman
Absolutely the best service you can get with Jackhammer knowledge, Jessy is a man of knowledge i have been dealing with these guys for a long time. I appreciate all the binds you have gotten me out of. Thanks again.
★★★★★ 10 months ago
Jim Tucker
Very nice , friendly people, smart intelligent also.
★★★★★ 7 years ago
Nicholas Gambino
Fel-Tech Hammer did a great job repairing and rebuilding my Tramac V32 and Rammer G80 hydraulic breakers. Highly recommended for their customer service and chisel prices. Real personal touch from the folks over there.
★★★★★ 8 months ago
James Gruber
Had problems with getting my parts on time, and new parts that worked. Frank then sent me a tested port, and it works well. All worked out in the end.
★★★★★ Edited 8 years ago
Benjamin Tyler Smith
Fel-Tech did a great job with my Rammer BR999 and BR4099. Got it fixed and turned around. Definitely worth the drive from Maine. Great company to work with.
★★★★★ 7 months ago
Aaron
Highly recommend, very knowledgeable and good customer service. Jesse went out of his way to get the information I needed. Thanks!
★★★★★ Edited 3 years ago
Eric Klein
Great help with our BTI 1280 hammer. Got us the chisel and tool retainers shipped quickly. We also ordered chisel grease. This was all very helpful. Highly recommended.
★★★★★ 7 months ago
Jake Dawson
They do not stand behind their work. Can’t rebuild a hammer right. Really disappointed!!
★★★★★ 10 months ago
Daniel Poulin
Great company to call. They helped me get my Allied 745 up and running. Seal kit worked great. Appreciate the help.
★★★★★ 6 months ago
JP Nilsen
As good as it gets. supplied parts that were need and advised when we had problem . Top notch company to do business with.
★★★★★ 3 years ago
Robert Ashby
They had it when no one else did! The Big Cheese talked to me like I was his most important customer... I learned a lot about Hammers.
Thanks
★★★★★ 9 years ago
Dear
Great business. Very helpful fixing my Soosan hammer. Great business!
★★★★★ 8 months ago
Eve Hinze
Great help. Really appreciate the Tramac SC28 chisels. Very responsive.
★★★★★ 7 months ago
Emily Hannon
Fantastic business. Very helpful with Rammer and Atlas-Copco parts. Highly recommended!
★★★★★ 10 months ago
Colin McCarthy
If you have never been to FEL-TECH Hammer Division, it’s truly an experience that every contractor will enjoy. They gave me a tour of the facility and I must say that I have never seen so many rebuilt hydraulic hammers, parts and tools for the hydraulic hammers. While I was there they were testing a rather large hammer in their test center and this was a treat to watch. The test center was a little intimidating in size and sound but, a treat to watch. I was treated like a very large contractor and the part that I needed badly, was in stock. I think the great company is amazing and the equipment and parts were fantastic. Thank you for the tour guys!!
Colin McCarthy
★★★★★ 9 years ago
Behemoth782
We needed two pins and four bushings made to fit a hammer to an excavator. They were friendly, extremely knowledgeable, well priced and fast. Ten times better than searching for a pin or a bushing online after-market or from an overpriced dealer.
★★★★★ 4 years ago
Kirk Rettger
Had an issue with a Hammer and called in to discuss what needed to be done for repairs. Jesse was extremely helpful and went above and beyond in making sure we purchased the correct parts. Highly recommended!
★★★★★ a year ago
Matthew R. Hannon
Great customer service. Helped me figure out a problem with my Soosan Hammer. Had the parts in stock and shipped it quickly.
★★★★★ 10 months ago
Fidel Ellis
They did a great job repairing my hydraulic breaker. Timely service. They take care of their customers.
★★★★★ 8 months ago
John Zimmerman
Absolutely the best service you can get with Jackhammer knowledge, Jessy is a man of knowledge i have been dealing with these guys for a long time. I appreciate all the binds you have gotten me out of. Thanks again.
★★★★★ 10 months ago
Nicholas Gambino
Fel-Tech Hammer did a great job repairing and rebuilding my Tramac V32 and Rammer G80 hydraulic breakers. Highly recommended for their customer service and chisel prices. Real personal touch from the folks over there.
★★★★★ 8 months ago
Benjamin Tyler Smith
Fel-Tech did a great job with my Rammer BR999 and BR4099. Got it fixed and turned around. Definitely worth the drive from Maine. Great company to work with.
★★★★★ 7 months ago
Eric Klein
Great help with our BTI 1280 hammer. Got us the chisel and tool retainers shipped quickly. We also ordered chisel grease. This was all very helpful. Highly recommended.
★★★★★ 7 months ago
Daniel Poulin
Great company to call. They helped me get my Allied 745 up and running. Seal kit worked great. Appreciate the help.
★★★★★ 6 months ago
